whats up, this is tampatec.
i'm going to install these dual headrest monitors.
they are a great value.
i'm going to leave a linkin the video description below.
so here is the headrest itself.
you can unzip the cover.
and tada! this is a 9 inch lcd screen.
you can connect headphones, switch av1 to av2, power, ir sensor.
and it tilts back and forth.
this is universal headrest monitor that works for most cars with a headrest.
so on my headrest i have thin rods, if you have thick rods then use the spacers.
if youwant to spread apart the rods then walk them outward.
to remove the headrest push the sidebutton then hold the button and use micro-screwdriver in release pinhole to release the headrest.
at the same time pushing in the releases lift up on the headrest.
remove seatcover and unlatch bottom of the seat but some cars don't have access so youmay need a razor to create access to pull out the wires.
both headrest monitors have cable coming out on same side so don't matter what side youinstall the headrest.
fish down a hanger and see it down here.
next tape the cable to the hanger and run it down.
push the pin in to connect the headrest.
connect wire harness here.
line up the dimple to small hole.
dimple should lock in the small hole.
then tuck it in.
lift and pull down to buckle it.
insert the wire harness into center console.
all my wiring is going to be connected inthe center console.
give yourself some slack so the seat can move back and forth.
here is my cigarette lighter power port wires.
i also connect a toggle switch so i can manually turn on off the monitors.
my ford mustang power port stays on for some reason even when the car is off so i connectedthe switch with LED so i know when to turn it off and won't drain my car battery whenmy car is off.
honda toyota lexus you probably won't need a switch because when the car is turned offthe power port is off too.
here are the headrest monitors cables.
red and black wires separate them.
then strip the ends.
twist the red wires together.
then twist the black wires together.
you can solder thewiresfor abetter connection.
heat up the wire then apply solder to wires.
lead solder works better than lead-free.
disconnect power port.
black wire is the ground and the color wire isthe positive 12v.
use a voltmeter to be sure.
meter probe black is negative.
we have 0v because the car is off and the switch.
turn the switch on and we have 12v.
now we can hook it up.
cut the black ground wire.
this the ground from the chassis of the car and this is the ground wire to the switchand power port.
twist and put on crimp connector.
that feels secure.
i'm going to do the same on this side.
positive side on power port and connect positive wires.
now connect green wire and crimp.
now we got ground and positive wires connected.
plug it back in.
to turn on the headrest monitors in my car i hit the switch but for most of you justturn on the car.
press power on the monitor and it works.
over here i connected PS2 and the reason why, ps2 slim can fit in my glove box and won'toverheat and its a DVD player.
i drilled a 3 inch hole for the heat from the ps2 to escape and to run ps2 wires out.
this is a Y RCA adapter see link below.
1 end is a female plug and the other end is 2 male plugs.
plug in ps2 yellow video wire to female plug andconnect other 2 male ends to av 1 on both monitors.
now plug in power inverter to power ps2.
what is cool about this LED switch it has a fusein it and let me know when its on or off.
this power inverter is 150 watt power inverter that powers my ps2.
now just press on theps2.
GAME ON! thanks for watching, if this video was informative give me a big thumbs up, ifyou want more howto videos just click subscribe, and if you know anyone interested in headrestmonitors click share button.