As a surfing sewer or a sewing surfer I know the importance of keeping my board in propercondition.
Now this ironing board is about ready for a new cover.
How about that fora tutorial today? Let’s get started.
Hey if you’ve been using your iron and ironing board properly it’s starting to look a lotlike this.
This thing is trashed and ready for a new cover.
And I love to put a fun coveron it because it’s going to be hanging out in my studio.
So I like to use something thatis fun to play with instead of the standard.
And so this week I’m choosing the Lux fromMichael Miller.
I also chose it because it’s 108 inch wide backing so you’re just goingto need ¾ of a yard.
And it’s a real heavy thread count so it’s going to last for along time.
You’re going to need some parachute cord or some sort of cording for your drawstring.
And then I love these little double cord locks so I can make a nice adjustment.
We’re makingthis very generic so the better the drawstring the better it fits if you know what I’mreally saying there, ok? So only other thing we’re going to need for this is the ironingboard cover, the old one.
Or better yet the padding because we’re going to make ourown template using the original.
So I just take my fabric and I’m going to lay it out so that I’ve got the whole placeto work on.
And then I’m going to use, like I said, the padding from my ironing board.
But the padding from the ironing board is only the size of the top.
It only fits onthe top of the board.
So what you’re going to want to do is you’re going to want tocut roughly a five inch perimeter all the way around.
So that we can wrap it aroundthe edge.
We’re going to do a single row of stitching to something the raw edge.
Andthen we’re going to do a second row of stitching to create the casing with the drawstring isgoing to go into, right? So here you see it and I can either cut or trace around this.
But I just want a five inch perimeter here to create what will become the ironing boardcover.
Here you see it all cut out and you can tell it’s not perfect.
This can be real rough.
Because again we have a lot of fabric to pull around the underside.
But that actually makesit nice and secure and stays fit well on our ironing board.
So I’m going to get thispadding out of the way.
And by the looks of it I probably should cut another piece ofpolyester batting that I could put right on top of it just to put a little more life cyclein this piece of padding, ok?Now we’re going to be working on this so that this is the right side.
So I”m goingto come over to my machine.
And my first seam allowance is going to be roughly a quarterof an inch.
Ok, I’ve got a polyester thread in my machine today because I’m doing moreindustrial style sewing let’s call it.
And I’m just going to roughly fold over here.
And I’m getting close to a corner to show you how to handle that.
So I’ve got abouta quarter of an inch fold.
This is a single fold at first .
And I’m going to stitch.
And then as I come around the corners I’m just kind of twisting it.
I’m going to letit wad up.
I’m going to let it ripple and wrinkle.
Again because this is going to behidden in that one inch casing.
But it starts to help create that edge.
Sometimes I’llkeep a little scissor handy so I can start to pull it and twist it as it goes.
And we’rejust burying the raw edge so we don’t have any fiber causing problems down the road.
Now you can start to see that working for me on that corner.
Now I’m just rollingit and twisting it.
And then once I come out of the this corner I’m going to have a superbig expresso, jump into super caffeinated mode and go all the way around as we do this.
Nice and easy.
Just like that.
Again this might get you the sloppy sewing award forthe day.
And that’s ok.
Because if anyone is looking on the bottom side of your ironingboard they really aren’t your friend anyway.
Ok I’m going to hit caffeination mode.
I’llbe right back for that second row of stitching.
Alright so we back stitched and we’re at the all way end.
We’ve gone all the wayaround with that first seam to kill the raw edge.
And let me show you.
This here is apretty decent corner.
You can see it ripples a little bit as we go around.
But again we’rejust going to take this and fold it over, no problem.
Here’s the first corner I wasstruggling a little bit more through.
But even that ugly corner is not going to show.
Remember it’s on the bottom side of the ironing board.
Now we are going to installour draw cord.
So I’m going to start by leaving my opening back here.
I’m not goingto bother putting a buttonhole or anything in here.
It’s the under side of an ironingboard cover that I will be replacing again within a year’s time.
So you can put a buttonholeif you would like.
It could go right there.
But I’m just going to leave a little opening.
So we’re going to start on the back end.
Now this time I’m folding over enough toget that cording through there.
I don’t recommend trying to do the cording while you’resewing.
It’s just too much to keep track of.
I do have a little edge guide that I’veclamped there with a magnet to my bed of my machine.
And I’m going to do a definitebackstitch.
A couple of them as a matter of fact because that‘s going to be the entryfor where the cord goes through.
And now I’m just going to, one more time, start workingmy way around here.
Keeping a nice equal distance to feed that draw cord.
The corners will bea little prettier.
They won’t be awesome but they will certainly be functional.
AndI’ll be right back with that done and show you how to get that draw cord in there.
Now as I’m coming into this end here I’ve got about a two finger opening I’m goingto leave.
So I’m just going to come up a little bit closer.
And again backstitch myselfseveral times so I can put good pressure on that.
And I probably should have pointed outbecause you all think I’m a professional out there but you’ll see that I really butcheredthe nose of my cover.
But you know what, again we just have to be able to slide our cordthrough there.
This is not going to show.
So if you’re struggling on some of thosecorners, hey either teach me how to do it better or don’t worry about it yourself.
Because it’s going to totally work.
We’re going to get ready for our draw cord next, ok? So down on my opening here I’mgoing to take my draw cord and I’m going to want a lighter so I can melt it at theend.
I want my little clippy handy here.
And then I’m also going to want to get myselfa safety pin and run this up through just like if it was my sweatshirt cord, you knowthat had come out in the dryer.
One of my tricks is to get that cord completely loosethough so it doesn’t tangle up as I’m going.
So what I’m going to do is put asafety pin on the end, string this bad boy up and show you how to finish it.
So I’ve almost made it all the way around my ironing board cover.
Not too difficultat all.
Even those wadded up corners, right? And you can see I’ve been wearing my cableor my cord around my neck.
And what I’m going to end up doing as I pop this out isI’m going to first remove my safety pin that I’ve got, ok? So I’m going to takethis off.
And then I’m going to take the cord lock and I”m going to slide it downon this one end first.
And this is going to help me keep track of everything.
I’m goingto stick that through there like that and I’m going to give myself a couple of inchessomething because I’m going to still tie this at the end.
Now that I’ve got a holdof this I can give myself more slack because I want to be able to extend all of the cordall the way through so that it’s totally fit nice and open.
We’ve got a lot of materialhere.
And so by being able to have this cord lock down here I’m not unpacking it andtaking the drawstring right back out that I just put in.
We don’t want to do that.
Ok and I’m coming around using my elbow to kind of secure back behind me here.
Sothis just takes a little bit of work but nothing difficult, ok? And that package of parachutecord is certainly plenty.
You will have a little extra left over.
I’ve got a reallyfun yarn caddy out there that uses that parachute cord too.
So you might want to keep that handy.
Ok, so now what I’m going to do because I can see I’ve got a little bit of gatherthere still around here is I’m going to give myself about eight or ten extra inchesover here.
And first I’m going to cut this.
And then if you don’t know polyester ornylon cords can be melted and should be melted so that they don’t continue to unravel.
So what I’m going to do is I’m going to secure that, ok? So I’ve heated it, that’shot.
Kids that are watching at home you must have your parents help you with this, please,please, please.
And then I’m also going to make my leftovers good too while I’mat it.
So I’m just going to heat that for a few seconds.
Let it cool briefly.
Give ita little roll and that will secure it and make it easier to put into the cord lock later.
Ok, so now I’ve got my cord lock here.
And this will be fun because I pre cut this ironingboard cover.
Like I said kind of generic, at home.
This ironing board cover was here.
So let’s see if my generic ironing board actually fits on this actual board behindme.
First I want to secure this.
So one last little knot back here so it doesn’t getaway from me.
And then I can pull that all the way to the back because I want to be ableto fit this here.
So we’ll start on our nose and we’ll bring it around.
Let’ssee if we can do this for all of us.
Let’s see, will that fit on our table ok? Ok, perfect.
A little on demand here.
Ok so you see I’ve got plenty of fabric and plenty of edgingto go all the way around just like this.
And then I come underneath and I start to takemy draw cord.
And I cinch it up, cinch it up nice and tight.
Look how great that fits.
Nice and secure all the way around.
Let me spin this just slightly.
I’m not sure ifyou can see what’s going on down here or not but I’ve got all that cording.
Now Ican cinch this up nice and tight like that and then I’ll either take this cord andtie it up under the bottom or if I really knew that was going to go on once and nevercome back off I could trim that back down and use the cord again for something else.
I’m not that cheap.
I’m going to leave it right where it’s at.
Because I want toget back to my other sewing projects now that I’ve got this wonderful new crisp and cleanironing board cover.
So what we need from you in the comments today, I want to hearabout your best ironing disaster.
What were you working on when things didn’t go sowell.
And you now are happy to have this awesome ironing board cover tutorial right here atMan Sewing.